Utilizing 3D printing for prosthetic limbs in developing nations and conflict zones

References

1. Agence France-Presse (2018);, 'Lab providing affordable prosthetics for people who've lost limbs fighting Islamic State'. , The Journal, 25 February, http://www.thejournal.ie/prosthetics-limbs-3867680-Feb2018/. Accessed 2 August 2019 .
   [Google Scholar]
2. Al-Ganadi, A.. (2015);, 'Management of vascular injury during current peaceful Yemeni revolution'. , Annals of Vascular Surgery, 29:8, pp. 1575-80.
   [Google Scholar]
3. Anderson, J., and Perry, H. R.. (2014);, 'Rehabilitation and restoration: Orthopaedics and disabled soldiers in Germany and Britain in the First World War'. , Medicine, Conflict and Survival, 30:4, pp. 227-51.
   [Google Scholar]
4. Arcam EBM (2018);, 'EBM electron beam melting: In the forefront of additive manufacturing'. , Arcam EBM, http://www.arcam.com/technology/electron-beam-melting/. Accessed 5 August 2019 .
   [Google Scholar]
5. Asbelle, C., and Porter, G.. (1972);, 'Accelerated drying of plaster casts with a microwave oven'. , American Orthotic & Prosthetic Association, 26:4, pp. 24-33.
   [Google Scholar]
6. Au, S.,, Berniker, M., and Herr, H.. (2008);, 'Powered ankle-foot prosthesis to assist level-ground and stair-descent gaits'. , Neural Networks, 21:4, pp. 654-66.
   [Google Scholar]
7. Ballard, D.,, Trace, A.,, Ali, S.,, Hodgdon, T.,, Zygmont, M.,, DeBenedectis, C.,, Smith, S.,, Richardson, M.,, Patel, M.,, Decker, S., and Lenchik, L.. (2017);, 'Clinical applications of 3D printing: Primer for radiologists'. , Academic Radiology, 25:1, pp. 52-65.
   [Google Scholar]
8. Baronio, G.,, Volonghi, P., and Signoroni, A.. (2017);, 'Concept and design of a 3D printed support to assist hand scanning for the realization of customized orthosis'. , Applied Bionics and Biomechanics, 2017: 8171520, https://doi.org/10.1155/2017/8171520. Accessed 23 July 2019 .
   [Google Scholar]
9. Belliveau, J.. (2016);, 'Humanitarian access and technology: Opportunities and applications'. , Procedia Engineering, 159, pp. 300-06.
   [Google Scholar]
10. Bergner, A.,, Bobbitt, B.,, Carter, S., and Gilson, S.. (1981);, 'The sickness impact profile: Development and final revision of a health status measure'. , Medical Care, 19:8, pp. 787-805.
    [Google Scholar]
11. Bhatia, S., and Sharma, S.. (2014);, '3D-printed prosthetics roll off the presses'. , American Institute of Chemical Engineers, 110:5, pp. 28-33.
    [Google Scholar]
12. Birrell, I.. (2017);, '3D-printed prosthetic limbs: The next revolution in medicine'. , The Guardian, 19 February, https://www.theguardian.com/technology/2017/feb/19/3d-printed-prosthetic-limbs-revolu tion-in-medicine. Accessed 19 March 2019 .
    [Google Scholar]
13. Borg, J.,, Jindström, A., and Larsson S.. (2011);, 'Assistive technology in developing countries: A review from the perspective of the Convention on the Rights of Persons with Disabilities'. , Prosthetics and Orthotics International, 35:1, pp. 20-29.
    [Google Scholar]
14. Braga, M.. (2014);, 'Inside the 3-D-Printed Limb Factory'. , Fast Company, 5 December, https://www.fastcompany.com/3039329/finally-a-good-use-for-3d-printing-prosthetic-limbs. Accessed 9 January 2020 .
    [Google Scholar]
15. Breitegger, B., and Kollatsch, J.. (2018);, '3D printing offers new hope to amputees'. , Spiegel, 9 July, https://www.industryleadersmagazine.com/3d-printing-is-helping-amputees-in-togo-madagascar-and-syria/. Accessed 2 November 2019 .
    [Google Scholar]
16. Bustreo, F.,, Genovese, E.,, Omobono, E.,, Axelsson, H., and Bannon, I.. (2005), Improving Child Health in Post-Conflict Countries Can the World Bank Contribute?, Washington, DC:: The World Bank Group;.
    [Google Scholar]
17. Centene Corporation (2018), Clinical Policy: Durable Medical Equipment and Orthotics and Prosthetics Guidelines, CP.MP.107, St. Louis:: Centene Corporation;.
    [Google Scholar]
18. Chalya, P. L.,, Mabula, J. B.,, Dass, R. M.,, Ngayomela, I. H.,, Chandika, A. B.,, Mbelenge, N., and Gilyoma, J. M.. (2012);, 'Major limb amputations: A tertiary hospital experience in northwestern Tanzania'. , Journal of Orthopaedic Surgery and Research, 7:18, https://doi.org/10.1186/1749-799X-7-18.
    [Google Scholar]
19. Cid de leon Ovalle, M.. (2016);, 'The future of prosthetic technology is here'. , Boss Magazine, 16 January, https://thebossmagazine.com/future-prosthetic-technology/. Accessed 2 November 2019 .
    [Google Scholar]
20. Clark, L.. (2014);, 'Sudanese volunteers are printing £60 limbs in six hours for local amputees'. , Wired, 8 January, https://www.wired.co.uk/article/impossible-not-printing-artificial-limbs. Accessed 2 November 2019 .
    [Google Scholar]
21. Dathan, J.. (2018);, 'The effects of ERW contamination in Sri Lanka'. , Journal of Conventional Weapons Destruction, 22:3, pp. 32-36.
    [Google Scholar]
22. Desmond, D.,, Gallagher, P.,, Henderson-Slater, D., and Chatfield, R.. (2008);, 'Pain and psychosocial adjustment to lower limb amputation amongst prosthesis users'. , Prosthetics and Orthotics International, 32:2, pp. 244-52.
    [Google Scholar]
23. Eschen Prosthetics and Robotics Labs (2018);, 'The fin'. , Eschen Prosthetics and Robotics Labs, 9 September, https://www.eschenpo.com/prosthetics-the-fin/. Accessed 19 November 2019 .
    [Google Scholar]
24. Eshraghi, A.,, Osman, N. A. A.,, Gholizadeh, H.,, Ali, S., and Shadgan, B.. (2013);, '100 top-cited scientific papers in limb prosthetics'. , BioMedical Engineering OnLine, 12:119, http://doi:10.1186/1475-925X-12-119.
    [Google Scholar]
25. Franchignoni, F.,, Tesio, L., and Orlandini, D.. (2002);, 'Mobility scales for lower limb-prosthetic patient: The locomotor capabilities index'. , Archives of Physical Medicine and Rehabilitation, 83:4, pp. 582-83.
    [Google Scholar]
26. Gailey, R. S.,, Roach, K. E.,, Applegate, E. B.,, Cho, B.,, Cunniffe, B.,, Licht, S.,, Maguire, M., and Nash, M. S.. (2002);, 'The amputee mobility predictor: An instrument to assess determinants of the lower-limb amputee's ability to ambulate'. , Archives Physical Medicine and Rehabilitation, 83:5, pp. 613-27.
    [Google Scholar]
27. Gkartzou, E.,, Koumoulos, E. P., and Charitidis, C. A.. (2017);, 'Production and 3D printing processing of bio-based thermoplastic filament'. , Manufacturing Review, 4:1, pp. 1-14.
    [Google Scholar]
28. Golovin, M.,, Marusin, N., and Golubeva, Y.. (2018);, 'Use of 3D printing in the orthopedic prosthetics industry'. , Biomedical Engineering, 52:2, pp. 100-05.
    [Google Scholar]
29. Granger, C. V.,, Hamilton, B. B.,, Keith, R. A.,, Zielezny, M., and Sherwin, F. S.. (1986);, 'Advances in functional assessment in medical rehabilitation'. , Topics in Geriatric Rehabilitation, 1:3, pp. 59-74.
    [Google Scholar]
30. Gretsch, K.,, Lather, H.,, Peddada, K.,, Deeken, C.,, Wall, L., and Goldfarb, C.. (2016);, 'Development of novel 3D-printed robotic prosthetic for transradial amputees'. , Prosthetics and Orthotics International, 40:3, pp. 400-03.
    [Google Scholar]
31. Grimmer, M., and Seyfarth, A.. (2004);, 'Mimicking human-like leg function in prosthetic limbs'. , in P. Artemiadis. (ed.), Neuro-Robotics: From Brain Machine Interfaces to Rehabilitation Robotics, Berlin:: Springer;, pp. 105-55.
    [Google Scholar]
32. Gross, B. C.,, Erkal, J. L.,, Lockwood, S. Y.,, Chen, C., and Spence, D. M.. (2014);, 'Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences'. , Analytical Chemistry, 86:7, pp. 3240-53.
    [Google Scholar]
33. Gunasekera, P.. (2017);, 'A locally manufactured foot and a ray of hope for amputees in Sri Lanka'. , USAID Frontlines, September/October, https://www.usaid.gov/news-information/frontlines/september-october-2017/locally-manufactured-foot-and-ray-hope. Accessed 20 February 2020 .
    [Google Scholar]
34. Gwamuri, J.,, Franco, D.,, Khan, K. Y.,, Gauchia, L., and Pearce, J. M.. (2016);, 'High-efficiency solar-powered 3D printers for sustainable development'. , Machines, 4:1, pp. 3-15.
    [Google Scholar]
35. Harkins, C.,, McGarry, A., and Buis, A.. (2012);, 'Provision of prosthetic and orthotic services in low-income countries: A review of the literature'. , Prosthetics and Orthotics International, 37:5, pp. 353-61.
    [Google Scholar]
36. Herbert, N.,, Simpson, D.,, Spence, W. D., and Ion, W.. (2005);, 'A preliminary investigation into the development of 3-D printing of prosthetic sockets'. , Journal of Rehabilitation Research and Development, 42:2, pp. 141-46.
    [Google Scholar]
37. Herr, H.,, Wilkenfeld, A., and Blaya, J.. (2002);, 'Patient-adaptive prosthetic and orthotic leg systems'. , Proceedings of the 12th Nordic Baltic Conference on Biomedical Engineering and Medical Physics, Reykjavik: MIT Media Lab, pp. 123-28.
    [Google Scholar]
38. Highsmith, J. T., and Highsmith, M. J.. (2007);, 'Common skin pathology in LE prosthesis users'. , Journal of the American Academy of Physician Assistants, 20:11, pp. 33-36.
    [Google Scholar]
39. Hosny, A.,, Keating, S. J.,, Dilley, J. D.,, Ripley, B.,, Kelil, T.,, Pieper, S.,, Kolb, D.,, Bader, C.,, Pobloth, A.,, Griffin, M.,, Nezafat, R.,, Duda, G.,, Chiocca, E. A.,, Stone, J. R.,, Michaelson, J. S.,, Dean, M. N.,, Oxman, N., and Weaver, J. C.. (2018);, 'From improved diagnostics to presurgical planning: High-resolution functionally graded multimaterial 3D printing of biomedical tomographic data sets'. , 3D Printing and Additive Manufacturing, 5:2, pp. 1-11.
    [Google Scholar]
40. Howard, C.,, Perry, B.,, Chow, J.,, Wallace, C., and Stokic, D.. (2017);, 'Increased alertness, better than posture prioritization, explains dual-task performance in prosthesis users and controls under increasing postural and cognitive challenge (Research Article)(Report)'. , Experimental Brain Research, 235:11, pp. 3527-39.
    [Google Scholar]
41. Hull, C. W.. (inventor) and 3D Systems Inc. (assignee) (1986), Apparatus for Production of Three-Dimensional Objects by Stereolithography, Arcadia:: US Patent 4575330;.
    [Google Scholar]
42. International Committee of the Red Cross (2007), Prosthetics and Orthotics Manufacturing Guidelines, Geneva:: ICRC Publications (Reference 0868);, https://www.icrc.org/eng/resources/documents/publication/p0868-1.htm. Accessed 23 May 2019 .
    [Google Scholar]
43. Jagannathan, M.. (2018);, 'This duo wants to do for prosthetics what fashion designers did for eyeglasses'. , Market Watch, 6 July, https://www.marketwatch.com/story/this-duo-wants-to-do-for-prosthetics-what-fashion-designers-did-for-eyeglasses-2018-07-06-12883815. Accessed 19 November 2019 .
    [Google Scholar]
44. Jiang, P.. (2017);, 'Emerging markets are the next frontier of 3D printing'. , Entrepreneur, 23 December, https://www.entrepreneur.com/article/305444. Accessed 19 November 2019 .
    [Google Scholar]
45. Kam, S.,, Kent, M.,, Khodaverdian, A.,, Daiter, L.,, Njelesani, J.,, Cameron, D., and Andrysek, J.. (2015);, 'The influence of environmental and personal factors on participation of lower-limb prosthetic users in low-income countries: Prosthetists' perspectives'. , Disability and Rehabilitation: Assistive Technology, 10:3, pp. 245-51.
    [Google Scholar]
46. Kauffman, T. L.,, Barr, J. O., and Moran, M.. (2007), Geriatric Rehabilitation Manual, , 2nd. ed., Philadelphia:: Churchill Livingstone;.
    [Google Scholar]
47. Kelly, J. D.. (2010);, 'Haitian amputees – lessons learned from Sierra Leone'. , New England Journal of Medicine, 362:11, p. e42.
    [Google Scholar]
48. Khasnabis, C.. (2015), Standards for Prosthetics and Orthotics Service Provision: 2015-2017 Work Plan (Version 4 September 2015), Geneva:: Department of Essential Medicines and Health Products & Management of Noncommunicable Diseases, Disability, Violence and Injury Prevention;.
    [Google Scholar]
49. Koebler, J.. (2012);, 'New prosthetics keep amputee soldiers on active duty'. , U.S. News & World Report, 25 May, https://www.usnews.com/news/articles/2012/05/25/new-prosthetics-keep-amputee-soldiers-on-active-duty. Accessed 28 July 2019 .
    [Google Scholar]
50. Kohler, F.,, Cieza, A.,, Stucki, G.,, Geertzen, J.,, Burger, H.,, Dillon, M.,, Schiappacasse, C.,, Esquenazi, A.,, Kistenberg, R. S., and Kostanjsek, N.. (2009);, 'Developing core sets for persons following amputation based on the International Classification of Functioning, Disability and Health as a way to specify functioning'. , Prosthetics and Orthotics International, 33:2, pp. 117-29.
    [Google Scholar]
51. Lee, K.,, Bin, H.,, Kim, K.,, Ahn, S.,, Kim, B., and Bok, S.. (2017);, 'Hand functions of myoelectric and 3D-printed pressure-sensored prosthetics: A comparative study'. , Annals of Rehabilitation Medicine, 41:5, pp. 875-80.
    [Google Scholar]
52. Legro, M. W.,, Reiber, G. D.,, Smith, D. G.,, Del Aguila, M.,, Larsen, J., and Boone, D.. (1998);, 'Prosthesis evaluation questionnaire for persons with lower limb amputations: Assessing prosthesis-related quality of life'. , Archives of Physical Medicine and Rehabilitation, 79:8, pp. 931-38.
    [Google Scholar]
53. Lindsey-Curtet, C.,, Holst-Roness, F. T., and Anderson, L.. (2004), Addressing the Needs of Women Affected by Armed Conflict: An ICRC Guidance Document, Geneva:: International Committee of the Red Cross, Women and War;.
    [Google Scholar]
54. Lu, M.,, Li, Y.,, Luo, Y.,, Zhang, W.,, Zhou, Y., and Tu, C.. (2018);, 'Uncemented three-dimensional-printed prosthetic reconstruction for massive bone defects of the proximal tibia'. , World Journal of Surgical Oncology, 16:47, pp. 1-9.
    [Google Scholar]
55. Mahoney, F. I., and Barthel, D.. (1965);, 'Functional evaluation: The Barthel Index'. , Maryland State Medical Journal, 14, pp. 56-61.
    [Google Scholar]
56. Marks, L., and Michael, J.. (2001);, 'Artificial limbs. (clinical review) (science, medicine, and the future)'. , British Medical Journal, 323:7315, pp. 732-35.
    [Google Scholar]
57. Martinez-Marquez, D.,, Mirnajafizadeh, A.,, Carty, C. P., and Stewart, R. A.. (2018);, 'Application of quality by design for 3D printed bone prostheses and scaffolds'. , PLoS ONE, 13:4(e0195291), pp. 1-47.
    [Google Scholar]
58. McGimpsey, G., and Bradford, T. C.. (2017), Limb Prosthetics Services and Devices; Critical Unmet Need: Market Analysis, Worcester:: Bioengineering Institute Center for Neuroprosthetics at Worcester Polytechnic Institute;.
    [Google Scholar]
59. Médecins Sans Frontières (2017), Reconstructive Surgery Hospital Amman, Jordan, Amman:: MSF;.
    [Google Scholar]
60. Mehrban, N.,, Paxton, J. Z.,, Bowen, J.,, Bolarinwa, A.,, Vorndran, E.,, Gbureck, U., and Grover, L. M.. (2010);, 'Comparing physicochemical properties of printed and hand cast biocements designed for ligament replacement'. , Advanced Applied Ceramics, 110:3, pp. 162-67.
    [Google Scholar]
61. Miller, W. C.,, Speechley, M., and Deathe, B.. (2001);, 'The prevalence and risk factors of falling and fear of falling among lower extremity amputees'. , Archives of Physical Medicine and Rehabilitation, 82:8, pp. 1031-37.
    [Google Scholar]
62. Montesinos-Magraner, L. I.,, Issa-Benítez, D.,, Pagès-Bolíbar, E.,, Meléndez-Plumed, M.,, González-Viejo, M. A., and Castellano-Tejedor, C.. (2016);, 'Physical and psychosocial functions of adults with lower limb congenital deficiencies and amputations in childhood'. , Rehabilitation Research and Practice, 26:14, pp. 944-53.
    [Google Scholar]
63. Mooney, L. M.,, Rouse, E. J., and Herr, H. M.. (2014);, 'Autonomous exoskeleton reduces metabolic cost of human walking during load carriage'. , Journal of NeuroEngineering and Rehabilitation, 11:80, pp. 1-11.
    [Google Scholar]
64. Murphy, D. P.. (2014), Fundamentals of Amputation Care and Prosthetics, New York:: Demos Medical Publishing, LLC;.
    [Google Scholar]
65. Murphy, B.,, Porcincula, D.,, Morgan, D.,, Ruggles, K.,, Aguayo, C.,, Mullen, J.,, Bowman, D., and Laiho, L.. (2016);, 'Prosthetic leg kit for deployment in developing countries'. , San Luis Obispo:: California Polytechnic State University, San Luis Obispo in association with Help One Walk International;.
    [Google Scholar]
66. Nathan, S.. (2018);, 'Future prosthetic: Towards the bionic human'. , The Engineer, 4 January, https://www.theengineer.co.uk/future-prosthetic/. Accessed 19 November 2019 .
    [Google Scholar]
67. National Institute of Health (2018), NIH 3D Print Exchange, Bethesda:: National Institute of Health;, https://3dprint.nih.gov/. Accessed 10 June 2019 .
    [Google Scholar]
68. New, J. P.,, McDowell, D.,, Burns, E., and Young, R. J.. (1998);, 'Problem of amputations in patients with newly diagnosed diabetes mellitus'. , Diabetic Medicine, 15:9, pp. 760-4.
    [Google Scholar]
69. Novell, R.,, Baker, D. M.,, Goddard, N. J., and Kirk, R. M.. (2013), Kirk's General Surgical Operations, , 6th. ed., Edinburgh:: Churchill Livingstone and Elsevier;.
    [Google Scholar]
70. Phillips, B.,, Ritter, S., and Mehta, K.. (2016);, 'Printed prostheses: Not yet ready for developing countries'. , Mechanical Engineering, 138:4, pp. 14-15.
    [Google Scholar]
71. Prasad, A. N., and Prasad, P. L.. (2009);, 'Children in conflict zones: The human and economic devastation caused by landmines'. , Medical Journal Armed Forces India, 65:2, pp. 166-69.
    [Google Scholar]
72. Ranger, B. J., and Mantzavinou, A.. (2017);, 'A course in prosthetics for the developing world: Merging education, research and industry to teach biomedical design for social impact'. , 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 14 September , Seogwipo.
    [Google Scholar]
73. Reiber, G.,, McFarland, L.,, Hubbard, S.,, Maynard, C.,, Blough, D.,, Gambel, J., and Smith, D.. (2010);, 'Servicemembers and veterans with major traumatic limb loss from Vietnam War and OIF/OEF conflicts: Survey methods, participants, and summary findings'. , Journal of Rehabilitation Research and Development, 47:4, pp. 275-97.
    [Google Scholar]
74. Retfalvi, D.. (2017);, 'The perfect fit – how an international team of students designed a solution for third-world amputees'. , MedTech Engine, 2 March, https://medtechengine.com/article/amparo-third-world-amputees/. Accessed 5 August 2019 .
    [Google Scholar]
75. Rybarczyk, B.,, Nyenhuis, D. L.,, Nicholas, J. J.,, Cash, S. M., and Kaiser, J.. (1995);, 'Body image, perceived social stigma, and the prediction of psychosocial adjustment to leg amputation'. , Rehabilitation Psychology, 40:2, pp. 95-110.
    [Google Scholar]
76. Sam, M.,, Childress, D.,, Hansen, A.,, Meier, M.,, Lambla, S.,, Grahn, E., and Rolock, J.. (2004);, 'The "Shape & Roll" prosthetic foot: I. Design and development of appropriate technology for low-income countries'. , Medicine, Conflict and Survival, 20:4, pp. 294-306.
    [Google Scholar]
77. Sarvestani, A. S., and Azam, A. T.. (2013);, 'Amputation: A ten-year survey'. , Trauma Monthly, 18:3, pp. 126-29.
    [Google Scholar]
78. Schmidt, R.. (2016);, 'PrintAbility Project'. , Toronto:: Nia Technologies;, http://www.rms80.com/prosthetics. Accessed 3 January 2020 .
    [Google Scholar]
79. Sebai, M. E.,, Bello, R. J.,, Clarke-Pearson, E.,, Redett, R. J.,, Wan, E. L.,, Manahan, M. A.,, Sacks, J. M.,, Cooney, D.,, Cooney, C. M., and Rosson, G. D.. (2016);, 'Severe deficiency of reconstructive surgery for the hidden victims of the Syrian crisis: Challenges and urgent call for solutions for non-fatal injury victims'. , Journal of the American College of Surgeons, 223:4, p. e128.
    [Google Scholar]
80. Service, R. F.. (2018);, 'New artificial nerves could transform prosthetics'. , Science Magazine, 31 May, http://www.sciencemag.org/news/2018/05/new-artificial-nerves-could-transform-prosthetics. Accessed 2 November 2019 .
    [Google Scholar]
81. Sinha, R.. (2013);, 'Adjustments to amputation and artificial limb, and quality of life in lower limb amputees'. , Ph.D. thesis, Groningen:: University of Groningen;.
    [Google Scholar]
82. Skylar-Scott, M. A.,, Mueller, J.,, Visser, C. W., and Lewis, J. A.. (2019);, 'Voxelated soft matter via multimaterial multinozzle 3D printing'. , Nature, 575:7782, pp. 330-35.
    [Google Scholar]
83. Srubar, W. V.,, Zhang, W.. (inventors) and University of Colorado, Boulder (assignee) (2016), Methods of Isolating Melt-Processible Polycarbonate from Plastic Waste, Methods for Preparing Polycarbonate-Containing Hybrid Polymers, and Compositions Comprising Same, Boulder:: US Patent US20180105668A1;.
    [Google Scholar]
84. Staats, T. B.. (1996);, 'The rehabilitation of the amputee in the developing world: A review of the literature'. , Prosthetics and Orthotics International, 20:1, pp. 45-50.
    [Google Scholar]
85. Starr, S.. (2017);, 'War survivors helped by groundbreaking 3D prosthesis technology'. , The Irish Times, 2 August, https://www.irishtimes.com/news/world/europe/war-survivors-helped-by-groundbreaking-3d-prosthesis-technology-1.3173899. Accessed 2 January 2020 .
    [Google Scholar]
86. Steen, J. J., and Heim, S.. (2000);, 'Evaluation of polypropylene prostheses designed by the International Committee of the Red Cross for transtibial amputees'. , Prosthetics and Orthotics International, 24:1, pp. 47-54.
    [Google Scholar]
87. Strait, E.. (2006);, 'Prosthetics in developing countries'. , Ph.D. thesis, Ames:: Iowa State University;.
    [Google Scholar]
88. Tetsworth, K. D., and Mettyas, T.. (2016);, 'Overview of emerging technology in orthopedic surgery: What is the value in 3D modeling and printing?'. , Techniques in Orthopedics, 31:3, pp. 143-52.
    [Google Scholar]
89. Thurston, A. J.. (2007);, 'Paré and prosthetics: The early history of artificial limbs'. , ANZ Journal of Surgery, 77:12, pp. 1114-19.
    [Google Scholar]
90. Trauner, K. B.. (2018);, 'The emerging role of 3D printing in arthroplasty and orthopedics'. , The Journal of Arthroplasty, 33:8, pp. 2352-54.
    [Google Scholar]
91. Ventola, C. L.. (2014);, 'Medical applications for 3D printing: Current and projected uses'. , Pharmacology and Therapeutics, 39:10, pp. 704-11.
    [Google Scholar]
92. Ware, J. E., Jr, and Sherbourne, C. D.. (1992);, 'The MOS 36-item short-form health survey (SF-36): I. Conceptual framework and item selection'. , Medical Care, 30:6, pp. 473-83.
    [Google Scholar]
93. Windrich, M.,, Grimmer, M.,, Christ, O.,, Rinderknecht, S., and Beckerle, P.. (2016);, 'Active lower limb prosthetics: A systematic review of design issues and solutions'. , Biomedical Engineering Online, 15(Supplement 3):140, http://doi:10.1186/s12938-016-0284-9.
    [Google Scholar]
94. World Health Organization (2005), Guidelines for Training Personnel in Developing Countries for Prosthetics and Orthotics Services, Geneva:: WHO;.
    [Google Scholar]
95. World Health Organization (2017), Standards for Prosthetics and Orthotics, Part 1: Standard, Geneva:: WHO;.
    [Google Scholar]
96. Zuniga, J.,, Katsavelis, D.,, Peck, J.,, Stollberg, J.,, Petrykowski, M.,, Carson, A., and Fernandez, C.. (2015);, 'Cyborg beast: A low-cost 3d-printed prosthetic hand for children with upper-limb differences'. , Boston Medical Center Research Notes, 8:10, http://doi:10.1186/s13104-015-0971-9.
    [Google Scholar]
97. Zuniga, J. M.,, Dimitrios, K.,, Peck, J. L.,, Srivastava, R.,, Pierce, J.,, Dudley, D.,, Salazar, D.,, Young, K. L., and Knarr, B. A.. (2018);, 'Coactivation index of children with congenital upper limb reduction deficiencies before and after using a wrist-driven 3D printed partial hand prosthesis'. , Journal of NeuroEngineering and Rehabilitation, 15:48, http://doi:10.1186/s12984-018-0392-9.
    [Google Scholar]
98. Rosenberger, Madeline Rae. (2020);, 'Utilizing 3D printing for prosthetic limbs in developing nations and conflict zones'. , Craft Research, 11:1, pp. 9-38, doi: https://doi.org/10.1386/crre_00013_1
    [Google Scholar]